Skin Boosters in Singapore

Skin boosters in Singapore: hyaluronic acid, polynucleotide, PDLLA, ECM and exosome skin booster vials at The Skin Longevity Clinic

HA, Polynucleotide, PDLLA, ECM and Exosome Compared

Skin boosters are injectable treatments placed in the superficial to mid dermis to change skin quality: hydration, texture, fine lines, pore appearance and elasticity. They do not add volume in the way a dermal filler does.1 Five categories are used at The Skin Longevity Clinic in Singapore, and each acts through a different mechanism. This page compares them so that the consultation starts from the right question: what the skin needs, rather than which product is being advertised.

Dr Rachel Ho assesses skin quality, history and goals before any skin booster is proposed. Her informational guide to the category is on drrachelho.com: skinboosters in Singapore, a doctor’s guide.

Skin booster types available in Singapore

Skin boosterActive materialMain targetsTypical courseDowntimeEvidence grade
Hyaluronic acid skin boosterNon-crosslinked or lightly crosslinked hyaluronic acidHydration, fine lines, crepey texture, dull skin2–3 sessions 4 weeks apart, maintenance every 6–12 monthsNeedle marks and small bumps for 24–72 hoursSystematic review of clinical studies; expert consensus2.3
Polynucleotide skin boosterPolynucleotides / polydeoxyribonucleotides derived from salmon DNASkin repair, under-eye fine lines, post-acne skin, elasticity3–4 sessions 2–4 weeks apartBumps and bruising for 2–5 daysSmall controlled studies; consensus statement4,5,6
PDLLA skin boosterPoly-D,L-lactic acid microparticles, often with hyaluronic acidCollagen stimulation, laxity, acne scars, pores2–3 sessions 4–6 weeks apart, results build over 3–6 monthsSwelling 2–3 days; rare delayed nodulesPreliminary clinical studies; literature review7,8,9
ECM skin boosterParticulated human acellular dermal matrixPore size, roughness, hydration, elasticity1–2 sessions, reviewed at 12–20 weeksSwelling and redness 2–5 daysOne randomised split-face trial (20 adults, 20 weeks)10
Exosome skin treatmentTopical exosome preparations applied after microneedling or laserPost-procedure recovery, tone, pigmentationPaired with 3–4 procedure sessionsFollows the paired procedureEarly studies; no injectable exosome product is approved by the US FDA11,12
Skin boosters in Singapore at a glance: hyaluronic acid, PDRN, collagen biostimulators and ECM skin boosters compared by main focus and suitability
Skin boosters at a glance: what each category is used for and where it is less suited.

Also available: a needle-free brightening peel skinbooster and a brightening skinbooster combining glutathione, vitamin C and tranexamic acid.

How skin boosters differ from dermal fillers and collagen biostimulators

Dermal fillers are crosslinked hyaluronic acid gels placed deeper to restore volume and contour. Skin boosters use softer or non-crosslinked material placed superficially to change the skin itself.1 Collagen biostimulators such as poly-L-lactic acid and calcium hydroxylapatite are injected deeper again and stimulate collagen over months; PDLLA sits between the two groups and is covered in both this page and the collagen biostimulator guide.

Other injectables are sometimes sold as skin boosters: polycaprolactone and polydioxanone microspheres (long-lasting collagen stimulators with a smaller evidence base and reports of late nodules), multi-ingredient “cocktail” boosters of hyaluronic acid with glycerol, amino acids or vitamins (harder to study because no single ingredient can be credited), and low-dose intradermal botulinum toxin for texture and oil control. These are discussed at consultation where relevant; they are not the clinic’s first-line skin boosters.

Types of skin boosters in Singapore: hydrating (hyaluronic acid), regenerative (polynucleotide, PDRN) and collagen-stimulating (PLLA, PDLLA, PCL, PDO) boosters classified by clinical use
Skin booster classification by mechanism: hydrating, regenerative and collagen-stimulating.

Which skin booster suits which skin concern

  • Dehydrated, dull or crepey skin: hyaluronic acid skin booster first.2 Polynucleotide if the skin is also thin or slow to recover.5
  • Fine lines around the eyes: polynucleotide has the most specific data for crow’s feet4; hyaluronic acid for surface hydration.
  • Enlarged pores and rough texture: ECM skin booster10 or PDLLA7; both are compared with energy-based options on the large pores treatment page.
  • Mild laxity and early sagging: PDLLA7,8; deeper laxity is a skin tightening question.
  • Post-acne skin and shallow acne scars: polynucleotide or PDLLA alongside the acne scar treatment plan.
  • Under-eye fine lines and dark circles: polynucleotide or ECM; structural hollowing is assessed on the dark eye circle treatment and eye bag treatment pages.
  • Pigmentation and uneven tone: the brightening skinboosters and exosome-assisted procedures, within a pigmentation treatment plan.
Treatment goalSkin booster category usually consideredWhy
Hydration and fine crepinessHyaluronic acid skin boosterHyaluronic acid attracts water and improves the feel of dry or tired-looking skin
Repair and recovery supportPolynucleotide skin boosterUsed for skin recovery, inflammation support and overall skin quality
Firmness and gradual collagen responsePDLLA or collagen biostimulatorsStimulate gradual collagen production and dermal support
Texture, pores and selected acne scarsECM skin boosterDermal matrix support and skin quality in selected patients
Under-eye skin qualityECM, hyaluronic acid or polynucleotide, depending on diagnosisThe cause may be thin skin, hollowing, pigmentation, vascular shadowing or dermal quality
Laxity or saggingRF skin tightening, collagen biostimulators or a combination planSkin boosters alone do not address deeper laxity or structural support
Volume lossDermal fillers or collagen biostimulatorsSkin boosters do not replace lost facial volume

How a skin booster treatment is selected at The Skin Longevity Clinic

The assessment covers skin hydration, texture, laxity, pore pattern, pigmentation and any active acne. Skin boosters are deferred while acne is active and are not used over infected or inflamed skin. Medical history covers autoimmune disease, keloid tendency, pregnancy and breastfeeding, previous filler or biostimulator treatment, and allergies (polynucleotide products are fish-derived). The plan names the category, the number of sessions and the review point at which the response is judged.

How The Skin Longevity Clinic selects a skin booster in Singapore: main concern, skin barrier and inflammation, pigment stability, collagen support, previous treatments, evidence and risks
Six factors assessed before a skin booster is proposed.

What happens during a skin booster session

Topical anaesthetic is applied for 20–30 minutes. Injections are placed by microdroplet, cannula or injector device depending on the product and area. A session takes 30–45 minutes. Small bumps at the injection points settle within 24–72 hours for hyaluronic acid and up to 5 days for polynucleotide and ECM products.5,10 Make-up can be worn from the next day.

Skin booster injection in Singapore: intradermal placement of hyaluronic acid in the dermis, above the hypodermis
Skin boosters are placed in the dermis, not the deeper planes used for fillers.

Skin booster results, sessions and maintenance

Hyaluronic acid results are visible at 2–4 weeks and last 6–12 months.2 Polynucleotide and PDLLA responses build over 8–12 weeks as collagen forms.4,7 The ECM trial measured improvement in pore area, hydration and elasticity from week 12 to week 20.10 Maintenance is planned at review, not sold in advance.

Skin booster side effects and risks

All categories share injection-related effects: bruising, swelling, small bumps and, rarely, infection.6 Product-specific risks include delayed inflammatory nodules or granulomas after PDLLA9, and vascular injury when any material is injected near the tear trough or temple. Exosome products are not approved for injection in the United States, and the clinic uses them topically only.11 Any lump lasting beyond two weeks should be reviewed.

Can skin boosters be combined with other treatments?

Yes, when different skin layers or concerns are involved, and in a planned sequence. For acne scars, RF microneedling or fractional laser is combined with a polynucleotide or PDLLA booster. For melasma and post-inflammatory pigmentation, sunscreen, pico laser or chemical peels come first and a brightening or hydrating booster follows. For volume loss or sagging, fillers or collagen biostimulators are needed before, or instead of, a skin quality injectable. Treatments are spaced two to four weeks apart; stacking them too quickly raises swelling, irritation and pigmentation risk. The same complaint can need different treatments: tired-looking skin may be dehydration, pigmentation, hollowing or thin skin, and only some of those are skin booster questions.

ConcernPossible causesPlanning note
Tired-looking skinDehydration, pigmentation, inflammation, thin skin, collagen loss, volume lossA skin booster may help skin quality; volume loss or pigmentation needs another approach
Enlarged poresOil production, acne, texture change, scarring, collagen changeECM skin booster, RF microneedling, fractional laser or acne control, depending on cause
Dark eye circlesPigmentation, vascular shadowing, under-eye hollowing, thin skin, dermal qualityECM or polynucleotide for skin quality; fillers or pigment treatment in other cases
Fine linesDehydration, collagen loss, repeated movement, skin thinningHyaluronic acid booster, collagen support, botulinum toxin or resurfacing, depending on cause
Acne scarsDermal injury, tethering, collagen loss, texture changeRF microneedling, fractional laser, subcision, ECM or collagen support
Sagging or laxitySkin laxity, collagen loss, fat pad descent, volume lossSkin boosters support skin quality; tightening, lifting or volume support may be required
Skin booster suitability in Singapore: tired-looking skin, enlarged pores and dark eye circles each have several causes, and only some are skin booster questions
The same concern can have different causes; the cause decides whether a skin booster is the right treatment.

What affects skin booster cost in Singapore

Cost depends on the category, the product volume, the number of areas and the number of sessions in the course. A quote is given after consultation, when the plan is known.

Skin booster FAQs

Which is the best skin booster in Singapore?

There is no single best product. Hyaluronic acid has the broadest evidence for hydration2, polynucleotide for under-eye fine lines4, PDLLA for collagen stimulation7, ECM for pore size10. The choice follows the skin finding.

Are skin boosters the same as fillers?

No. Fillers add volume in deeper planes; skin boosters change skin quality in the superficial dermis.1

How long do skin boosters last?

Hyaluronic acid 6–12 months2; polynucleotide and PDLLA are reviewed at 3–6 months with maintenance planned from the response.4,7

Can skin boosters be combined with laser or RF microneedling?

Yes, in sequence. Energy-based treatments and skin boosters are usually spaced two to four weeks apart so each can be assessed on its own.

Are skin boosters safe during pregnancy?

Skin boosters are deferred during pregnancy and breastfeeding because safety data are lacking.

Skin booster assessment at The Skin Longevity Clinic

A skin booster is chosen for what the skin needs, not for the product name. Dr Rachel Ho first assesses hydration, texture, pores, laxity and pigment, then matches one category (hyaluronic acid, polynucleotide, PDLLA, ECM or exosome) to the main concern.

The approach at the clinic is conservative:

  • treat the concern that matters most first
  • use the fewest sessions that reach the goal
  • review the skin at each visit before adding a second category

Assessments take place at Scotts Medical Center, 9 Scotts Road. Book through the contact page or call +65 6514 2688.

References

  1. Rho NK, Kim HS, Kim SY, et al. Injectable “Skin Boosters” in Aging Skin Rejuvenation: A Current Overview. Arch Plast Surg. 2024;51(6):528–541. doi:10.1055/a-2366-3436.
  2. Ghatge AS, Ghatge SB. The Effectiveness of Injectable Hyaluronic Acid in the Improvement of the Facial Skin Quality: A Systematic Review. Clin Cosmet Investig Dermatol. 2023;16:891–899. doi:10.2147/CCID.S404248.
  3. Belmontesi M, De Angelis F, Di Gregorio C, et al. Injectable Non-Animal Stabilized Hyaluronic Acid as a Skin Quality Booster: An Expert Panel Consensus. J Drugs Dermatol. 2018;17(1):83–88. PubMed.
  4. Kim JH, Kim ES, Kim SW, Hong SP, Kim J. Effects of Polynucleotide Dermal Filler in the Correction of Crow’s Feet Using an Antera Three-Dimensional Camera. Aesthetic Plast Surg. 2022;46(4):1902–1909. doi:10.1007/s00266-022-02832-8.
  5. Cavallini M, Bartoletti E, Maioli L, et al. Consensus report on the use of PN-HPT (polynucleotides highly purified technology) in aesthetic medicine. J Cosmet Dermatol. 2021;20(3):922–928. doi:10.1111/jocd.13679.
  6. Lee KWA, Chan KWL, Lee A, et al. Polynucleotides in Aesthetic Medicine: A Review of Current Practices and Perceived Effectiveness. Int J Mol Sci. 2024;25(15):8224. doi:10.3390/ijms25158224.
  7. Seo SB, Park H, Jo JY, Ryu HJ. Skin rejuvenation effect of the combined PDLLA and non cross-linked hyaluronic acid: A preliminary study. J Cosmet Dermatol. 2024;23(3):794–802. doi:10.1111/jocd.16085.
  8. Lee KWA, Chan LKW, Lee AWK, et al. Poly-d,l-lactic Acid (PDLLA) Application in Dermatology: A Literature Review. Polymers (Basel). 2024;16(18):2583. doi:10.3390/polym16182583.
  9. Perez Willis KM, Ramirez Galvez R. Granuloma after the Injection of Poly-D,L-Lactic Acid (PDLLA) Treated with Triamcinolone. Case Rep Dermatol Med. 2024;2024:6544506. doi:10.1155/2024/6544506.
  10. Lee YI, Chau NH, Nguyen NH, et al. Injectable Particulated Human Acellular Dermal Matrix Booster for Skin Restoration: An Integrated Randomized, Split-Face, Double-Blinded Clinical Trial and Preclinical Study. Int J Mol Sci. 2026;27(5):2193. doi:10.3390/ijms27052193.
  11. US Food and Drug Administration. Public Safety Notification on Exosome Products. 6 December 2019. doi:10.1002/lsm.23628.